Dampers
BAYSAN Marine has developed a wide range of Damper Drive Plates to fit most engine/gearbox combinations.
Reduces gear noise, o allows engine to run at lower speeds, stops spline wear.
All dampers are designed to be Fail-Safe and maintain the drive if the flexible element fails.
Special back plates up to 467 mm (SAE 14) diameter.
The flexible elements are made from a Polyester Elastomer which has good heat qualities and is not affected by salt water, diesel and lubrication oils.
Installation to the engine is quick and easy.
H130
Vertical Reduction Hydraulic Marine Gearbox
Maximum Power: 146 Hp (108 Kw)
A hydraulic marine gearbox with twin countershaft designed, separated oil-operated multi-disc clutches for ahead and astern drive allowing full rated power to be transmitted continuously in either direction.
Due to forward and astern gear ratios are same convenient to twin engine installations.
Consists of two separate halves to facilitate servicing.
The oil pump and hydraulic control valves being externally designed for easy accessibility.
Soft gear lever provides controlling facility with spiral remote control.
Suitable for high performance applications, pleasure and heavy duty conditions in fishing and tour boats.
Fully works tested, reliable and simple to install.
The hydraulic system is nevertheless provided with a mechanical lock-up device for added security, so that in the unlikely event of hydraulic failure the boat can be brought safely back to port. Access to this device is via a detachable cover located on top of the main gearcase.
In case of proper usage according to safety usage conditions, proper engine, shaft, propeller selection and errorless assembling occured has 2 years warranty.
Design and manufacturing activities of all Baysan's products comply with ISO 9001:2008.
H250A
Hydraulic Marine Gearbox 8⁰ Down-Angle Shaft
Maximum Power: 336 Hp (250 Kw) A hydraulic marine gearbox with twin countershaft designed, separated oil-operated multi-disc clutches for ahead and astern drive allowing full rated power to be transmitted continuously in either direction. Due to forward and astern gear ratios are same convenient to twin engine installations. Consists of two separate halves to facilitate servicing. The oil pump and hydraulic control valves being externally designed for easy accessibility. Soft gear lever provides controlling facility with spiral remote control. Suitable for high performance applications, pleasure and heavy duty conditions in fishing and tour boats. Fully works tested, reliable and simple to install. The hydraulic system is nevertheless provided with a mechanical lock-up device for added security, so that in the unlikely event of hydraulic failure the boat can be brought safely back to port. Access to this device is via a detachable cover located on top of the main gearcase. In case of proper usage according to safety usage conditions, proper engine, shaft, propeller selection and errorless assembling occurred has 2 years warranty. Design and manufacturing activities of all Baysan's products comply with ISO 9001:2008.
H500
Vertical Reduction Hydraulic Marine Gearbox
Maximum Power: 500 Hp (370 Kw)
A hydraulic marine gearbox with twin countershaft designed, separated oil-operated multi-disc clutches for ahead and astern drive allowing full rated power to be transmitted continuously in either direction.
Due to forward and astern gear ratios are same convenient to twin engine installations.
Consists of two separate halves to facilitate servicing.
The oil pump and hydraulic control valves being externally designed for easy accessibility.
Soft gear lever provides controlling facility with spiral remote control.
Suitable for high performance applications, pleasure and heavy duty conditions in fishing and tour boats.
Fully works tested, reliable and simple to install.
The hydraulic system is nevertheless provided with a mechanical lock-up device for added security, so that in the unlikely event of hydraulic failure the boat can be brought safely back to port. Access to this device is via a detachable cover located on top of the main gearcase.
PTO(Power take off) presents as an optional extra convenient to engine rpm.
In case of proper usage according to safety usage conditions,proper engine ,shaft,propeller selection and errorless assembling occured has 2 years warranty.
Design and manufacturing activities of all Baysan's products comply with ISO 9001:2008.
H500A
Vertical Reduction Hydraulic Marine Gearbox
Maximum Power: 500 Hp (370 Kw)
A hydraulic marine gearbox with 80 down angle shaft, twin countershaft designed, separated oil-operated multi-disc clutches for ahead and astern drive allowing full rated power to be transmitted continuously in either direction.
Due to forward and astern gear ratios are same convenient to twin engine installations.
Consists of two separate halves to facilitate servicing.The oil pump and hydraulic control valves being externally designed for easy accessibility.
Soft gear lever provides controlling facility with spiral remote control.
Suitable for high performance applications, pleasure and heavy duty conditions in fishing and tour boats.
Fully works tested, reliable and simple to install.
The hydraulic system is nevertheless provided with a mechanical lock-up device for added security, so that in the unlikely event of hydraulic failure the boat can be brought safely back to port. Access to this device is via a detachable cover located on top of the main gearcase.
PTO(Power take off) presents as an optional extra convenient to engine rpm.
In case of proper usage according to safety usage conditions, proper engine, shaft, propeller selection and errorless assembling occured has 2 years warranty.
Design and manufacturing activities of all Baysan's products comply with ISO 9001:2008.
H60
Vertical Reduction Hydraulic Marine Gearbox
Maximum Power: 63 Hp (47 Kw)
Reverse reduction marine transmission with hydraulically actuated multi-disc clutches.
Suitable for high performance applications and pleasure duty conditions in fishing and tour boats.
Soft gear lever which provides controlling facility with spiral.
Fully works tested,reliable and simple to install.
In case of proper usage according to safety usage conditions, proper engine, shaft, propeller selection and errorless assembling occured has 2 years warranty.
Design and manufacturing activities of all BAYSAN's products comply with ISO 9001:2008.
H80
Vertical Reduction Hydraulic Marine Gearbox
Maximum Power: 80 Hp (60 Kw)
Reverse reduction marine transmission with hydraulically actuated multi-disc clutches.
Suitable for high performance applications and pleasure duty conditions in fishing and tour boats.
Soft gear lever which provides controlling facility with spiral.
Fully works tested,reliable and simple to install.
In case of proper usage according to safety usage conditions, proper engine, shaft, propeller selection and errorless assembling occured has 2 years warranty.
Design and manufacturing activities of all BAYSAN's products comply with ISO 9001:2008.
M10
Mechanical Marine Gearbox Vertical Reduction
Maximum Power: 10 Hp (7.5 Kw)
Reverse reduction marine transmission with mechanically actuated claw clutch.
Suitable for high performance applications and pleasure duty conditions in fishing and tour boats.
Soft gear lever which provides controlling facility with spiral.
Fully works tested,reliable and simple to install.
In case of proper usage according to safety usage conditions, proper engine, shaft, propeller selection and errorless assembling occured has 2 years warranty.
Design and manufacturing activities of all BAYSAN's products comply with ISO 9001:2008.
M30
Mechanical Marine Gearbox Vertical Reduction
Maximum Power: 30 Hp (22 Kw)
Reverse reduction marine transmission with mechanically actuated multi-disc clutches.
Suitable for high performance applications and pleasure duty conditions in fishing and tour boats.
Soft gear lever which provides controlling facility with spiral .
Fully works tested,reliable and simple to install.
In case of proper usage according to safety usage conditions, proper engine, shaft, propeller selection and errorless assembling occured has 2 years warranty.
Design and manufacturing activities of all BAYSAN's products comply with ISO 9001:2008.
M30C
Mechanical Marine Gearbox Vertical Reduction
Reverse reduction marine transmission with mechanically actuated claw clutch .
Suitable for high performance applications and pleasure duty conditions in fishing and tour boats.
Soft gear lever which provides controlling facility with spiral .
Fully works tested,reliable and simple to install. In case of proper usage according to safety usage conditions, proper engine, shaft, propeller selection and errorless assembling occured has 2 years warranty.
Design and manufacturing activities of all BAYSAN's products comply with ISO 9001:2008..
M60
Mechanical Marine Gearbox Vertical Reduction
Maximum Power: 63 Hp (47 Kw)
Reverse reduction marine transmission with mechanically actuated multi-disc clutches.
Suitable for high performance applications and pleasure duty conditions in fishing and tour boats.
Soft gear lever which provides controlling facility with spiral.
Fully works tested, reliable and simple to install.
In case of proper usage according to safety usage conditions, proper engine, shaft, propeller selection and errorless assembling occured has 2 years warranty.
Design and manufacturing activities of all BAYSAN's products comply with ISO 9001:2008.
Shaft Couplings
Clamps to give a better fit than a solid coupling.
Produced by high quality steel.
Able to accommodate normal shaft tolerances.
Available in standard sizes (Both Metric and Imperial).
Easy to install and position.
Baysan Marine has developed a comprehensive range of Steel Clamp Half Couplings with flange sizes from 4 to 6 inch diameter.
Steel Clamp Half Couplings can accommodate the variations that occur with normal shaft tolerances, are easy to install and can be adjusted to the required position on the shaft.
Capacity to machine Split Half Couplings to special sizes.
